304 Stainless Steel Pipe 2 inch Sch 40

304 stainless steel pipe 2 inch Sch 40 is a seamless austenitic pipe supplied with a 60.3 mm outside diameter and a 3.91 mm nominal wall. The general-purpose 304 grade combines good corrosion resistance with easy forming and welding, which makes it a dependable choice for water lines, food and beverage plant piping, architectural tube and general process service.

Specifications

This item sits within our wider range of stainless steel pipe, supplied in Sch 10 to Sch 80 walls, diameters from 1/2 inch to 12 inch and in both 304/304L and 316/316L grades.

Applications

Typical applications include process water piping, food, dairy and beverage lines, heat exchanger tubing, architectural and structural tube, and general chemical service where chloride levels stay moderate. Because 304 is austenitic and non-hardening, the pipe bends, flares and welds cleanly, and it stays ductile well below zero. The heavier Sch 40 wall provides more stiffness and a higher pressure rating than Sch 10, so it is often specified for longer unsupported spans. Each shipment can be supplied with a mill test certificate showing chemical composition and mechanical properties.

Inquire Now

Need a quotation, sample length or mill test certificate for 2 inch Sch 40 304 stainless steel pipe? Contact us with your quantity, wall thickness, length and destination port — our export team replies within 24 hours.

Related Reading

Fixing your specification? Read steel pipe dimensions, our guide to outside diameter, wall thickness and schedule designations, before you confirm the order.